Le yincwadi eqinisekisiwe ye-zhaga engu-18 JL-710, ingakusiza ukuxazulula inkinga mayelana nokushintsha kwe-AC kwe-DC.Ngamanye amazwi, ukwehlisa izindleko ezilinganayo zemishini yamandla ayisizayo, ukufaka kangcono isilawuli se-zhaga esingu-0-10V futhi usebenze kahle.
Isici
1.wires, ungakwazi egcizelele ubude.
I-2.wire gauge: amandla #18AWG, isiginali #20AWG.
3. Iwasha engangeni manzi.
4. ngaphansi <0.12w
5.Ibanga le-Voltage Elilinganiselwe Lokufaka (Ubukhulu): 85-305VAC
I-6.Okukhipha i-DC Voltage: 12-24V
7. I-Zhaga Receptacle kanye ne-Base ene-Dome Kits etholakalayo ukuze Ufinyelele ku-IP66
| Imodeli | JL-710 |
| Ipharamitha Yokufaka i-Zhaga | |
| Ibanga le-voltage elilinganiselwe | 100-277VAC |
| I-Voltage Range elinganiselwe(Ubukhulu) | 85-305VAC |
| Isilinganiso esiphezulu sokufakwa kwe-AC yamanje | 30mA (ngaphansi kuka-220VAC) |
| I2t | 0.009A2s (ngaphansi kuka-220VAC) |
| Ukusebenza kahle kokuguqulwa | 80% (ngaphansi kuka-220VAC) |
| Ipharamitha yokuphuma kwe-Zhaga | |
| I-voltage yokuphumayo | 12-24V DC |
| I-voltage ezinzile ukulungisa ukunemba | +/-2% |
| Ikalwe okwamanje | 0.21A |
| Amandla alinganiselwe | 5W |
| Umsindo | 150 mVp-p |
| I-Ripple | 100 mVp-p |
| Izinga lokulungiswa komugqa | +/-0.12% |
| Izinga lokulungiswa komthwalo | +/-5% |
| Po | <0.12W |
| Enye Ipharamitha | |
| I-Mufti-protection | Ukuvikela okufushane, Ukuvikelwa kwamanje (ukulayisha ngokweqile), Ukuvikelwa kwe-over-voltage, Ukuvikelwa kwesekethe evulekile |
| Isitifiketi | CE, RoHS, UL/CUL |
| Izinga Lokuvutha | I-UL94-V0 |
| Ukudlidliza Komshini | I-IEC61000-3-2 |
| Izinga Lokushisa Lokusebenza | -40°C~55°C |
| Umswakama Osebenzayo | 5%RH~99%RH |
| Sebenzisa ubude bempilo | >=80000h |
| Isilinganiso se-IP | IP66 (ngaphansi kwesilawuli se-zhaga esixhunyiwe) |
| Isisindo Cishe | awu 85g |
4 PIN-710
Amathiphu: ukuhlanganisa isilawuli sethu sochungechunge lwe-zhaga, ukuze kwehliswe okokusebenza kwamandla okusiza ukulayisha kumshayeli wokufiphalisa.
| Into | Incazelo | Uhlobo |
| 1 | Idatha ye-24VDC | ukuphuma kwamandla |
| 2 | GND | ukuphuma kwamandla |
| 3 | NC | - |
| 4 | I-DIM+ (0-10+) | Okokufaka kwesignali |
