JL-320C E26 Lamp Holder Multifunctional Light Control Switch

parammable-lamp-holder-controller_01
Product Description
JL-320C Lamp Holder Multi-functional Electronic Light Control Switch is an intelligent bulb light controller developed based on the E26 lamp holder. The product is suitable for autonomously controlling candlestick bulbs according to the ambient lighting level. Users can rotate the gear setting to switch the time and control strategy.

parammable-lamp-holder-controller_03

parammable-lamp-holder-controller_02

Product Features
* multi-voltage: 120-277VAC
* Infrared lighting filtering
* E26 interface
* Small size
* IR-Filtered Phototransistor
* Reflective light compensation
* Multiple functions can be selected

Product Parameter Lists

Item JL-320C
Rated Voltage 120-277VAC
Sensor Type IR-filtered phototransistor
Rated Frequency 50/60Hz
Turn On Level  

20Lx(+/-5)

Turn Off Level Initial:50+/-5 Lx*Once reflected light (Δ)is detected :50+Δ+/-5 Lx
Reflected light Compensation Upper Limit 1200+/-100Lx
Initialization Stage -5s(on)
Ambient Temperature -40℃ ~ +70℃
Related Humidity 96%
Screw Base Type E26
Failure Mode Fail-Off
Zero Crossing Control Built-in
FCC Class B
certifications UL,RoHS

 Installation Instructions
Set the gear to select the function;
Disconnect power;
Unscrew the bulb from the E26 lamp holder;
Screw the light control device fully into the E12 lamp holder, and then tighten it clockwise;
Screw the bulb into the bulb holder of the light control device;
Connect power and turn on the light switch.

parammable-lamp-holder-controller_04

 

 Initial testing
When testing during the day, after turning on the power and waiting for 5 seconds for the light to automatically turn off, cover the photosensitive window with an opaque material.
The light will turn on after 5 seconds.
Do not cover it with your fingers, as the light passing through your fingers may be enough to prevent the light control device from turning on.

Precautions
1. Be sure to turn off the AC power when installing to avoid accidental contact with the metal threads inside the product’s E26.
2.If the light control device is installed very close to the light source surface of the lamp and the lamp power is relatively large, it may exceed the limit of reflective light compensation and cause the device to shut down by itself.
3.Do not cover the photosensitive window with your fingers, as the light passing through your fingers
4. After setting the rotating gear position, the corresponding function will take effect after power is restored.

parammable-lamp-holder-controller_05

Product Coding Lists
JL-320C HY
1:Enclosure Colores
H=black cover K=Gray N=Brazon cover J=white cover

2: Y=Silver lamp holder
Null=Gloden lamp hodler

 


Post time: Mar-26-2024