JL-236CG NEMA Interface twist Lock Smart Light Control Switch ZigBee Wireless Mode

Product Description

JL-236CG rotary lock Zhilian optical switch is applicable to cloud control and automatic control mode. It can be used for municipal roads, park lighting, landscape lighting, etc.

This product has a ZigBee communication module. When used with JL-235CZ (sub control), it can be remotely controlled through UM-9900 intelligent lamp pole management system.

Features

1-ANSI C136.10 Twist-lock

2-fail mode

3-Delay 5-20 seconds

4-Multi-voltage available

5-Built-in surge protection

6-Infrared filter photosensitive tube

Product Parameter

Installation Instructions
· Turn off the power supply.
· Connect the socket according to the following image.
· Push the photocell controller up and rotate it clockwise, locking it in the socket.
· If necessary, adjust the socket position to ensure that the light sensor window points to the north direction shown in the top triangle of the light controller.

Initial testing
*When installing for the first time, it usually takes several minutes to close the optical controller.
*To test “open” in the daytime, cover the light-sensitive window with opaque material.
*Do not cover it with your fingers, because the light passing through your fingers may be enough to turn off the light control device.
*The light controller test takes about 2 minutes.
*The operation of the light controller is not affected by weather, humidity or temperature changes.