Product Description
The JL-312C Candlestick Lamp Holder Universal Electronic Light Control Switch is an intelligent candle holder lamp light controller developed based on the E26 lamp holder. This product is suitable for autonomously controlling candlestick bulbs according to the ambient lighting level, and is also compatible with CFL/LED bulbs.
Product Features
* Standard E12 interface
* self-inductive light switch
* It is perfect suitable for CFL/LED
Parameter Lists
Item | JL-312C | |
Rated Voltage | 120VAC | |
Rated Loading | 60w Tungsten
0.5A e-Ballast |
|
Power Consumption | 0.5W Max | |
Rated Frequency | 50/60Hz | |
Turn On Level | 16 Lx(+/-) | |
Turn Off Level | 64 Lx(+/-) | |
Ambient Temperature | -40℃ ~ +70℃ | |
Related Humidity | 96% | |
Screw Base Type | E12 | |
Fail Mode | Fail-off | |
Zero Crossing Control | Built-in |
Installation Instructions:
1. Turn off the power.
2. Twist off the light bulb.
3. Screw the photo control switch fully into the lamp socket.
4. Screw the light bulb into the bulb holder of the photo control switch.
5. Connect the power and turn on the light switch.
* During installation, do not aim the photosensitive hole towards artificial or reflective light, as it may cycle on or off at night.
* Avoid using this product in opaque glass lamps, reflective glass lamps, or wet areas.
Initial Testing:
When first installed, the light controller usually takes a few minutes to turn off. To test “on” during the day, cover the photosensitive window with black tape or opaque material. Do not cover it with your fingers, as the light passing through your fingers may be enough to turn off the light control device. The light controller test takes about 2 minutes.
JL-312 H Y
1:Enclosures colors
H= Black cover K= gray cover N=brazon cover J=white cover
2: Y=Silver lamp holder
null=Gloden lamp holder
Post time: Mar-18-2024