Hiʻona
1. Huahana Huahana: JL-712A
2. Haʻahaʻa Voltage: 12-24VDC
3. Hoʻohana Mana: 12V / 3.5 mA;24V/3.5 mA
4. Hoʻololi ʻokoʻa i ka microwave frequency adjustment, i mea e pale aku ai i ka hoʻopili like ʻana i ka hoʻokomo ʻana.
5. ʻAno ʻike: optic + microwave motion sensor
6. Hoʻolālā hoʻolālā kānana kukui uila
7. Kākoʻo Dimming: 0-10V
8. kiʻekiʻe ikaika wai kaawale manao
9. Hoʻopili maʻamau interfaces: zhaga book18
10. zhaga Receptacle a me kahi Base me nā Dome Kits i loaʻa iā Reach IP66
| Hoʻohālike | JL-712A3 |
| Voltage | 12V/45 mA, 24V/30mA |
| Hoʻohana mana (i ke ao) | 3.5 mA |
| ʻAno sensor | ʻIke ʻike a me ka neʻe microwave |
| Hoʻokuʻu ʻia | 0-10v, ka laulā hoʻololi 2%, hiki ke hoʻokele: 40 mA |
| Laulā Loaʻa Spectral | 350~1100nm, ka lōʻihi hawewe Peak 560nm |
| ʻO ka paepae kukui hoʻohuli paʻamau | 50 lx +/-10 |
| ʻO ka paepae hoʻomālamalama manawa maoli * 1 | i ka wā e hoʻomālamalama ʻia ai ka ambient ma hope o ka hoʻā ʻana i ke kukui i 100% o ka mālamalama i kēlā me kēia manawa +40 lx (+/-10) palena kiʻekiʻe: 50+40 lx (+/-10) palena haʻahaʻa: 6000 lx (+/-100) |
| Ka palena kiʻekiʻe o ka uku uku māmā | 6000 lx (+/-100) |
| hoʻomaka i ka hoʻoponopono mokuʻāina | Ma hope o ka hoʻohana ʻana, e hoʻāla ʻia ke kukui ma ke ʻano maʻamau i ka 100% kukui a mālama ʻia no 5 kekona, a laila e pio koke ke kukui a komo i ke ʻano hana ʻike pilikino * |
| Māmā i ka lohi | 5s (E hoʻā wale ʻia ke kukui i ka wā e māʻona ai ka mālamalama ambient no 5S mau) |
| Hoʻopaneʻe hoʻopaneʻe | 20s (E hoʻopau i nā kukui ke māʻona ka mālamalama ambient no 20S mau) |
| Hoʻololi i ka lākiō o ka hoʻomālamalama kukui: 0% ~ 20%, 20% ~ 100% | 1s |
| Hoʻololi i ka lākiō hoʻololi o ka mālamalama mālamalama: 100%~20%, X~0% | 8s |
| 100% ka lōʻihi o ke kukui ma hope o kona neʻe ʻana | 30s |
| ʻO ka mālamalama kū (ke māʻona ka mālamalama akā ʻaʻohe mea e neʻe) | 20% |
| ʻO ke kiʻekiʻe e kau ana ke kiʻekiʻe | 15 m |
| ʻImi ʻike | 4-8 m (Ma lalo o 15m ke kiʻekiʻe e kau ana) |
| ʻO ke kihi ʻike | 92 degere |
| Ka pae ʻā | UL94-V0 |
| Hoʻopilikia kūʻokoʻa (ESD) | IEC61000-4-2Hoʻokuʻu kelepona: ± 8kV，Ka hoʻokuʻu ʻana o ka ea: ±15kV，PALA A |
| Kuʻi Mechanical | IEC61000-3-2 |
| Ka Mahana Hana | -40°C~55°C |
| ʻO ka haʻahaʻa hana | 5%RH~99%RH |
| Ola | >=80000 hola |
| helu IP | IP66 |
| ʻano pale ʻokoʻa | kūkulu ʻia ka pale ʻana i ka neʻe anti-trigger |
| Palapala | CE, CB, puke zhaga 18 |
ʻO JL-712A3 Ka neʻe ʻana o ka microwaveʻO ZhagaKiʻi kiʻi kiʻi sensor
Diagram of LED Fixture Brightness and Ambient illuminance Curve
ʻO ke kiʻikuhi o ka microwave induction
4 pin prongs
| 'ikamu | Wehewehe | ʻAno |
| 1 | 12-24 VDC | hookomo mana |
| 2 | GND / DIM- | hookomo mana |
| 3 | NC | Hoʻopuka hōʻailona |
| 4 | DIM+ (0-10+) | Hoʻopuka hōʻailona |
