Don Shigar da Rarraba Hoto don Hasken Wutar Kiki na Led

Yadda Ake Shigar da Rarraba Hoto don Led Parking Lot Light?

Mamaki!Za ku sami hanyar shigarwa da aiki cikin sauƙi, zaku kuma son sarrafa firikwensin hoton mu.

Don haka a sauƙaƙe kunnawa, ana shigar da wannan mai sarrafa hasken ta matakai 3.

1) Nuna alkiblar arewa.Ajiye alamar jagorar arewa na NEMA Receptacle da arewa na madaidaicin madaidaicin madaidaicin hoto a wuri ɗaya a kwance.

2) Tura cikin matsayi na rami.lokacin da aka ajiye gefen arewa na soket-kulle da mai haɗawa a cikin madaidaiciyar hanya ɗaya, da fatan za a tura ikon sarrafa hoto a cikin ramin ramin soket cikin sauƙi da a tsaye.

3) Wannan mataki daya ne mai matukar muhimmanci.ya kamata ku kula da agogon agogo da karkatar da kulle.

Nau'in samfur:

ANSI C136.10-1996 Standard JL-205C Mai Kula da Hoto

Lantarki Kulle PhotoControl Revertacle: NEMA 3 PIN Prongs

Zane-zane na Aikace-aikacen Mai sarrafa Photocontrol

Kunna ta atomatik da magriba, kashe ta atomatik da wayewar gari.Tabbas, zaku iya daidaita mai sarrafa hoto da aka gina a ƙimar LDR daidai da matakin haske na yanayi.duk da haka, nau'ikan nau'ikan photocell daban-daban na yanayin aikin dukiya da tasirin ƙimar LDR (Mai dogaro da Haske) akan aiki dare da rana.

Domin ba da cikakken wasa ga aikin na'urar firikwensin haske, ya kamata ka bincika ƙarin halaye na samfurin da ƙarin ma'aunin lantarki masu dacewa na samfurin.A lokaci guda, don kada ku shafi aikin yau da kullun na mai sarrafa haske, da fatan za a yi la'akari da mahimman sigogin samfur, kuma zaku iya tuntuɓar akwatin saƙo na:neal@chiswear.com.

Muhimmin Siffa

1) Akunna wutar lantarki don amfani da wutar lantarki mara amfani.

2)Makullin sarrafa hoto na murƙushewa tare da kushin farantin 2-4 a saman saman, 2 plated pad as JL-240XB model, 4 plated pad as JL-240XA.Yana dimming da fitowar sigina zuwa hasken titin na nesa mara waya ta Zigbee da tattara bayanan yanayi.

Karɓar Kulle Kulle Hoto: JL-240XA-14

Juya Makullin Hoto Mai Sauya: JL-205C

Shawarwari Kayan Kayayyakin

Wannan JL-208 shorting hula (mai hana ruwa ruwa) ƙira ce don maye gurbin na'urar sarrafa hoto akan na'urar hasken ku don gazawar yanayin ko koyaushe a kunne.Mafi dacewa don hasken titi, hasken filin ajiye motoci, hasken lambun da haɓaka aikace-aikacen hasken titi da sauran zasu buƙaci hasken yankin jama'a.

Siffar

1.Mai yarda da ANSI C 136.10 3 makullin karkatarwa

2.PC mai ƙarfi abu kuma ƙara anti-UV ƙari

3.Abu mai ɗorewa da nauyi don shigarwa cikin sauƙi, da kuma tsayayya da tasirin abubuwa masu tashi.

4.Zaɓuɓɓukan Motsawa:JL-208-15, JL-208-23

5.Matsayin Ƙimar Mai hana ruwa: IP65, IP66 (shekaru 2020 Sabon shahararren salon salo)

6. 0-480VAC, Matsakaicin 15 amp.

Yawaita Bayar da Shawarar Sayi Nasihar Kayan Samfuri

Idan manufar ku ta sarrafa hasken wuta ta atomatik a kowace rana, kuma kasafin kuɗin ku ya iyakance, kuma kun yi la'akari da shirye-shiryen ƙarin haɓaka aikin hasken birni mai wayo, pls za ku zaɓi mafita biyu daban-daban ko kuma idan kuna son warwarewar yau da kullun, kuma ku tuntuɓi. ni::neal@chiswear.com