Bayanin Samfura
JL-251/252/253 jerin murƙushe makullin masu kula da hasken haske sun dace da kansu don sarrafa fitilun titin LED daidaitacce (DAIL dimming) dangane da yanayin hasken yanayi na yanayi.Ana iya amfani da su a cikin titunan birni, hasken shakatawa, hasken ƙasa, da dai sauransu.
Wannan jerin samfuran suna amfani da ƙirar ƙirar microprocessor tare da bututu mai ɗaukar hoto mai infrared.Yana ba da masu kame masu nauyi mai nauyi (MOV) don kare fitilun daga hawan wuta da walƙiya.
Bugu da kari, ana iya saita aikin sarrafa jinkiri na daƙiƙa 10 don gujewa wuce gona da iri saboda fitillu ko walƙiya da dare.
Wannan jerin samfuran na iya kula da halaye na dindindin kuma abin dogaro, kuma gudun ba da sanda na iya wuce zagayowar rayuwar aiki 10,000.Lokacin da aka sanye shi da harsashi mai kariya na Layer biyu, zai iya samar da rayuwar aiki mai tsawo don jerin samfurori na JL-251/252/253.
Wannan jerin samfuran suna ba da tashoshi masu kullewa waɗanda suka dace da buƙatun ANSI C136.41, kuma sun cika daidaitattun buƙatun ANSI / UL773 don amfani da toshewa da karkatar da masu kula da hasken kulle a cikin hasken yanki.
Siffar Samfurin
ANSI C136.41 Kulle karkatarwa
DALI dimming
· Kariyar karuwa MOV 40kA
· Zaɓin harsashi mai kariya mai Layer biyu don tsawon rayuwa
· Faɗin wutar lantarki
IP65 a hannun jari/ IP67 na zaɓi
· Infrared tace photosensitive tube
· Kunna/kashe na yau da kullun
Tsakar dare (JL-252, JL-253)
Rarraba lalata hasken LED (JL-253)
Jadawalin Umarnin Aiki
Dangane da matakin hasken muhalli, fitilun fitilun LED da aka sarrafa ana daidaita su da kyau don tabbatar da yanayin haske iri ɗaya a cikin yankin ikon.Lokacin da matakin hasken halitta ya kai 110% na ƙimar da aka ƙididdige, fitilar da aka sarrafa za ta kashe ta atomatik, kamar yadda aka nuna a cikin aiwatar da sauyawa daga layin ja zuwa fitowar sifili a ƙasa.
Sigar Samfura
Abu | JL-251/JL252/JL-253C | |
Ƙimar Wutar Lantarki | Saukewa: 120-277VAC | |
Matsakaicin ƙididdiga | 50/60Hz | |
Yanayin aiki | -40 ℃ ~ + 70 ℃ | |
Danshi na Dangi | 96% | |
An ƙididdige Loading | 1000W Tungsten, 1800VA Ballast, 8A e-Ballast @120VAC 5A e-Ballast @208-277VAC | |
Amfanin Wuta | Matsakaicin 1.2W | |
Kama Kame | MYL1-40K511 | |
Kunnawa / Kashe lux | Kunna | Kunnawa | 100Lx, Kashewa · 100Lx / kowane buƙatun abokin ciniki | |
Yanayin kasawa | Kasa-Kun | |
IP Rating | IP67 | |
Babban kariya | Murfin Sandwich (na zaɓi) | |
Kayan Rufe | PC/PP Sandwich murfin | |
Takaddun shaida | ul, ce, RoHS |
Umarnin Shigarwa
Danna mai sarrafa hoto sama kuma juya shi a kusa da agogo don kulle shi cikin soket.
Idan ya cancanta, daidaita matsayi na soket don tabbatar da cewa tashar jiragen ruwa mai haske tana nunawa zuwa arewa da aka nuna ta saman triangle na mai sarrafa haske.
Gwajin Farko
Lokacin shigarwa na farko, yawanci yana ɗaukar mintuna kaɗan kafin mai sarrafa hasken ya kashe.
· Don gwada “akan” yayin rana, rufe taga mai haske da kayan da ba su da tushe.
Kar a rufe da yatsu, saboda hasken da ke wucewa ta cikin yatsu zai iya isa ya kashe na'urar sarrafa haske.
· Gwajin sarrafa hasken yana ɗaukar kusan mintuna 2.
*Sauyin yanayi, zafi, ko yanayin zafi baya shafar aikin wannan mai sarrafa hasken.
1: JL-251C
C=120-277VAC
E=347VAC
F=480VAC
2: 4 = Kashe fitilu
5 = Kunna fitilu
3: P = PP harsashi na waje
K = PP harsashi na ciki + PC na waje harsashi
4: F = Blue
Mai iya daidaitawa
5: IP65 = Elastoplast zobe + silicone m hatimi
IP67 = Silicone zobe + siliki na ciki da na waje hatimi (ciki har da fil jan karfe)
1: JL-252
JL-253
2: C=120-277VAC
E=347VAC
F=480VAC
3: 4 = Kashe fitilu
5 = Kunna fitilu
4: P = PP harsashi na waje
K = PP harsashi na ciki + PC na waje harsashi
5: F = Blue
Mai iya daidaitawa
6: IP67 = Silicone zobe + silicone ciki da waje hatimi (ciki har da jan karfe fil)
IP65 = Elastoplast zobe + silicone waje hatimi
7: Canja hasken haske: XXX, naúrar: Lux
8: Kashe jinkiri: XX, naúrar: daƙiƙa
9: Rabon dimming tsakar dare: Naúrar DXX: hours
10: Tsakar dare lokacin raguwa: Naúrar LXX: hours
Lokacin aikawa: Nuwamba-27-2023